Gutters and downspouts - Clean out (more frequently if necessary); inspect and repair weaknesses; check for proper drainage and repair if necessary.

Chimney/stovepipe - Clean flue (more frequently if needed); repair any cracks in flue or any loose or crumbling mortar; check gasket on woodstove, and replace if necessary.

Siding - Inspect and clean siding. Repair if necessary; check joints between wood and masonry.

Exterior caulking - Inspect caulking.

Storm windows and doors - Replace any cracked or broken glass, tighten or repair any loose or damaged frames and repaint if necessary; replace broken, worn, or missing hardware; tighten and lubricate door hinges and closers; check for broken or missing glazing.

Window and door weather-stripping - Inspect and repair, or replace if deteriorating or missing.

Drain-waste and vent system - Flush out system.

Hot-water heating system - Lubricate pump and motor; bleed air from radiators or convectors.

Forced warm-air heating system - Vacuum heat exchanger surfaces; clean and lubricate blower blades and motor; check fan belt tension and adjust if necessary; replace cracked or worn belt, check for leaks and repair if necessary.

Gas burner - Clean burners and ports.

Oil burner - Have professionally serviced; lubricate fan and motor bearings.

Thermostat - Clean heat sensor, contact points, and contacts; check accuracy and replace if necessary.

Garage Doors - Clean and lubricate hinges, rollers, and tracks; tighten screws.

Foundation - Check grading for proper slope away from foundation wall.

Trees - Trim back all tree limbs and vegetation away from roof.

Heating - For steam heating, check shut-off valve for leaks and drain lower water cut-off per manufacturer's instructions.

Roof - Inspect roof surface, flashing, eaves, and soffits; repair if necessary.